SAME-DAY WASHER REPAIR:
(248) 479-6463
It is a big problem when the washer or dryer goes out. You have no time for trips to the laundromat and do not want dirty clothes to pile up. Call a local repairman experienced in for washer repair or dryer repair. Pick an affordable and reliable appliance repair company with same-day service.
Licensed technicians have the tools, experience, and training to do all common as well as complicated repairs during the initial service visit. They stock their vans with manufacturer parts for all major brands of dryers and washers, like Kenmore, Bryant, Sears, GE, LG, Carrier, Goodman, Armstrong, Lennox, RCA, and others!
LOUD/CONSISTENT NOISES
The most common reason technicians are called for washer repairs is a loud noise emanating from the appliance. Experienced repairmen will identify the source and reason for the noise and fix the problem by repairing it or replacing the part. Broken pump motors, worn belts, and bad bearings are the usual reasons for washer noise.
WON’T TURN ON/AGITATE
The first thing if your washing machine does not turn on is to check to make sure it is plugged in and that the circuit breakers did not flip off. Broken timers, thermal fuses, or door latches are common reasons a washer will not turn on.
When it does not agitate, there is a problem with agitator cogs, the drive belt, a coupler, thermal fuse, or a bad transmission. Depending on the severity of the problem you may be able to get by with repairs or may need to replace parts.
WON’T SPIN
When your washer won’t spin the trouble is with the wax motor, motor coupling, or door latch. These are all issues that experienced repairmen can repair promptly on a single visit and have your clothes spinning in the washer again.
OVERFLOWSÂ
A washer overflows when there is a bad water level pressure switch, water inlet valve, or air dome tube on the machine. Local technicians fix all of these problems.
NO HOT/COLD WATER
When the water in the washer is either too cold or too hot, the issue is usually with an inlet hose or a broken temperature control switch. Call a friendly repairman to repair the problem.
LOUD/CONSTANT NOISES
Loud noises are the most common reason for service calls for dryers. These noises come from broken seals, bearings, or worn belts. Appliance professionals carry the parts and tools to fix these problems on all major brands and models.
NO HEAT/WON’T DRY
When a dryer does not produce enough heat to dry your clothes it is pretty useless. It is also a problem if the dryer gets too hot and scorches your garments. The problem will be a broken cycling thermostat, high limit thermostat, or heating element for both issues. Call a local technician and one of our certified technicians will diagnose and fix the problem.
WON’T TURN ON/TUMBLE
The most common reason that a dryer will not tumble is because it is not plugged in. Check this and make sure the circuit breaker has not flipped. Then call a trained technician if there is still an issue. The problem will be with the high limit thermostat, cycling thermostat, or heating element which will need to be repaired or replaced.
WON’T TURN OFF
A broken timer or door switch may not let the dryer turn off. Call an experienced repairman to fix this problem.
TIMER WON’T ADVANCE
If the dryer does not advance and complete the drying cycle, the problem is the timer motor or cycling thermostat. Appliance pros carry the part and tools to do this job promptly and efficiently.
Triumph Appliance Repair of Troy is service that helps homeowners connect with local service contractors. All contractors are independent and Triumph Appliance Repair of Troy does not warrant or guarantee any work performed. It is the responsibility of the homeowner to verify that the contractor they hire has the necessary license and insurance required for the work being performed. Local repairs performed by AJ’s Appliance Repair.
Copyright ©2024  Triumph Appliance Repair | 4616 Bonniebrook Dr #2 Troy, MI 48098 | Sitemap